Radiant Barrier Contractors

When it comes to keeping your home cool in the summer, a radiant barrier can significantly lower your energy bills. However, you must pair radiant barriers with conventional insulation to prevent heat transfer via conduction and convection.

Radiant Barrier Contractors

Radiant barriers are applied either as sheets of foil or as a spray-on application. They may be installed in new construction or existing homes. For professional help, contact Radiant Barrier Contractors Houston.

Radiant barriers reduce summer heat gain, helping homeowners save on energy costs by lowering cooling bills. They reflect radiant heat rather than absorbing it, and they don’t reduce thermal insulation’s effectiveness like conventional insulation materials do. However, radiant barriers are more effective in hot climates than in cool ones, and they should be installed alongside existing insulation.

The installation method used to apply a radiant barrier will determine its overall cost and effectiveness. Some installers staple radiant barrier foil to the underside of attic rafters, while others lay it over existing insulation. Both methods provide comparable results, but the former is more labor-intensive and may require expert help to reach hard-to-reach areas of the attic.

Homeowners who choose to install their radiant barriers themselves can follow the instructions in the manufacturer’s installation guides and safety tips. It is important to make sure that the attic insulation is properly installed and free of air leaks before installing a radiant barrier, as moisture in the attic can damage the material.

In addition, homeowners should carefully consider how much of an attic space they want to insulate with a radiant barrier. Adding too much can result in overheating and higher utility bills, which could be counterproductive to saving energy.

Once the radiant barrier is installed, homeowners should regularly inspect and maintain the existing attic insulation to ensure that it remains in good condition. If it is damaged or compromised, they should repair it immediately to prevent further damage and to avoid compromising the efficiency of the radiant barrier.

It is also important to note that radiant barrier foil is not a vapor barrier and should not be used in attics with ductwork. Moisture condensation in the attic can cause the foil to deteriorate, and a leaky ceiling can lead to mold growth and other costly problems. To minimize these risks, homeowners should check their ceilings and attic insulation for signs of moisture on a regular basis, and they should address any issues promptly. In addition, they should check for signs of air leaks around can lights, fixtures, and attic doors.


Radiant barriers are made from sheets or coatings of aluminum foil applied to a number of substrate materials. Some products are also designed with a middle layer of tightly woven fabric to increase strength and durability. Radiant barrier foil can be either one- or two-sided, with the reflective side facing the attic floor insulation and the non-reflective side facing the roof deck. Both types of radiant barriers are effective in reducing attic heat and cooling energy costs.

The energy efficiency of radiant barrier insulation varies by the type and quality of material used, as well as its thickness and construction. For example, a radiant barrier that is designed to be used as a roof cover requires a much thicker product than that intended for use in an attic space. The thickness of the foil also determines its durability and effectiveness.

Unlike traditional insulation, which is often rated by an R-value, radiant barriers are typically categorized based on their emissivity and reflectivity properties. The higher a radiant barrier’s emissivity rating, the more it will absorb and emit thermal radiation. The lower the emissivity of the material, the more it will reflect radiant heat away from the attic floor and roof deck.

Most manufacturers provide emissivity and reflectivity ratings for their products. Homeowners should be aware of these factors and compare pricing for different brands of radiant barriers to ensure they receive the best value for their money.

The installation method of a radiant barrier may also affect the price, as will the size and complexity of the attic space to be covered. For example, installing a radiant barrier in an attic with a ceiling fan may require cutting through the ceiling joists to install the material. To minimize these and other potential costs, homeowners should consult with a radiant barrier contractor to discuss their options and get estimates.

To estimate the amount of radiant barrier required for an attic, homebuyers should first measure the dimensions of the attic space. Then, they should subtract 6 inches from the length measurement to account for a 3-inch ventilation space at the top and bottom of the attic. After calculating the total square footage, the homeowner should purchase enough material to cover this area.

Safety Precautions

Radiant barrier contractors use a variety of techniques to install radiant barriers. These include both a rolled sheet and a spray-on application. For either type, the installer should follow the manufacturer’s instructions and take proper safety precautions. It’s also important to prepare the attic space before installation begins and to create a safe working environment. For example, the attic should be inspected to make sure it’s free of moisture and leaks and that it can support the weight of the radiant barrier. In addition, it’s a good idea to have the attic ductwork inspected for any signs of wear and tear.

When installed properly, a radiant barrier can help reduce cooling costs by reflecting heat back into the attic space. However, it’s important to remember that radiant barriers don’t act as a replacement for conventional insulation and that they only offer some protection against radiant heat transfer. In fact, it’s best to combine a radiant barrier with other forms of insulation to achieve the highest level of energy efficiency.

The most common way radiant barrier is installed in a new home is to drape the rolled sheet between the roof rafters and secure it using metal roofing screws. This method minimizes dust accumulation on the foil-faced surface, which is typically made of aluminum. In an existing home, the attic floor can be used to place the radiant barrier, but care should be taken not to cover any vents, recessed lighting fixtures, or kitchen and bathroom vents. This could interfere with airflow and cause the system to work inefficiently.

Another option for installing a radiant barrier is to use 1 x 2 furring strips to extend the attic floor over joists and trusses. This will ensure that there is an open air space on one side of the radiant barrier, which is necessary for its effectiveness. It’s also a good idea to inspect the attic for any air leaks before adding a radiant barrier.

When using a radiant barrier spray, it’s a good idea to use protective gear, including goggles and a respiratory mask. Additionally, it’s a good idea to test the product on a small area of the attic before beginning the full application.


A radiant barrier is an excellent way to help keep your home cool and save on energy costs, but it’s only as effective as the rest of your attic insulation. That’s why it’s important to install your radiant barrier in conjunction with other attic insulation upgrades, such as blown-in cellulose and fiberglass insulation. The combination of both thermal and radiant barriers will work together to create a more efficient attic space, helping you reduce your heating and cooling bills by up to 20%.

The most common radiant barrier material is a foil-like product that’s loosely draped across the attic floor. Because this material is highly reflective, it prevents heat from transferring into the living space of the home. As a result, it helps lower energy bills and makes homes more comfortable throughout the summer months.

While there are DIY kits available that homeowners can use to install radiant barriers, it’s usually best to leave this type of project to a professional. Incorrect installation can make the aluminum barrier less effective. It can also lead to safety concerns, especially if the barrier comes into contact with exposed wiring.

When a radiant barrier is improperly installed, it can also cause problems with your existing attic insulation. If the radiant barrier is placed over the attic insulation, it can trap moisture and lead to mildew or other issues. That’s why it’s important for homeowners to use a company that can ensure that the radiant barrier is installed correctly and doesn’t interfere with any other attic materials.

Once a radiant barrier is in place, it’s important to regularly inspect it for signs of wear and tear. If any repairs or maintenance are needed, these should be addressed promptly to help preserve the efficiency of the attic. It’s also important to remove dust and debris from the surface of the radiant barrier regularly so it can continue to reflect heat.

If you’re struggling to keep your house cool and want to lower your energy costs, consider a radiant barrier from Ragsdale. Radiant barriers can significantly lower your energy costs by reflecting the sun’s heat from your roof and attic. As a result, your air conditioning system will not have to work as hard to cool your home.